Tiles take up mud moisture - empty tiles

　　The friends that have experienced the renovation will need to have seen the workers' experts bathing the tiles in advance of laying the tiles. A lot of people feel very curious concerning this phenomenon. No matter just what the tile brand can be, how the tiles are good or bad, the tiles are about the pavement. Before you definitely ought to soak in water. So where is the intention of the tiled water? The following and Xiao Bian together to be aware of the tile is not soaking in water, bubble water seriously isn't enough and even the punishment of infusing water incorrectly plus the attention to the tile drenched in water.

　　Tiles take up mud moisture - empty tiles
　　The tile before paving isn't immersed in water as well as has insufficient immersion time frame. Under the condition which the humidity of the brick body seriously isn't enough and the water just isn't saturated, the moisture inside cement mortar will always be absorbed prematurely after appearing laid, and the bond strength on the cement mortar after getting absorbed will decrease, in so doing Causes emptying of tiles.

　　Below normal circumstances, tiles (especially glazed tiles) ought to be soaked in water for further than 2 hours leading to a plastering to allow this tiles to absorb drinking water.

　　Suction mortar shrinks : tile cracking
　　If a tile that has a certain water absorption rate is not immersed in water ahead of paving, the tile will absorb moisture in the process of setting and also increasing the strength from the cement mortar after paving, and the brick surface will crack due to pulling force of your cement mortar. Tile cracking due to insufficient water soaking usually occurs right after the tile is complete.

　　Mortar unclean - tile aroma
　　If the cement mortar is actually accidentally mixed with dusty water or contaminants if Villa Tile the cement mortar is stirred, the impure water or dirt will probably be sucked into the tile from the water-absorption tile, and the unclean moisture will remain in the interior belonging to the tile, and the odor problem will easily arise.

　　In addition, if there isn't any hollowing out of the particular tile without water soaking, water inside the ground may breed bacteria, and pursuing odor problems will simply occur.

　　Roman Tile
　　Hollowing continues to help deteriorate - tiles show up off
　　If the wall tiles have not been discovered or addressed promptly after empty percussion, the scope of vacant drums will gradually expand and eventually it's going to cause shedding.